December 16, 2018, 07:27:31 am *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
  Print  
Author Topic: pulse dialing and the obitalk 200  (Read 323 times)
dgodwin
Newbie
*
Posts: 3


« on: December 05, 2018, 06:36:45 pm »

We had a obi100 (RIP) and a pulse tone converter to utilize the rotary phone mounted in the kitchen.  With the obi100 it was plug and play but with the new obi200 we just installed, we're having a few issues.  Looking into the setting I noticed that in the last dialed number, it showed that multiple digits were registered 2 or 3 times.  Can anyone give me some insight on which settings to adjust to fix this?  I searched and didn't see any recent threads.  Thanks in advance! 
Logged
SteveInWA
Hero Member & Beta Tester
*****
Posts: 5228



« Reply #1 on: December 06, 2018, 05:34:34 pm »

That's the fault of your pulse-to-tone converter's lack of adherence to DTMF standards.

I have a 1947 Western Electric model 302 rotary phone with a Rotatone converter built in, and it's connected to an OBi 200.  It works fine at the default settings.
Logged

--Steve

Google Voice Forum Product Expert

https://productforums.google.com/forum/#!forum/voice
azrobert
Hero Member & Beta Tester
*****
Posts: 3659


« Reply #2 on: December 06, 2018, 08:17:02 pm »

Do you still have the OBi100? You might be able to attach the converter to the OBi100 and route calls to the OBi200.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC