OBi2182
OBi1022
Poly D230
OBi200
OBi202
OBi212
OBiWiFi5G
January 04, 2022, 08:07:31 am
Welcome,
Guest
. Please
login
or
register
.
News
:
Forum Home
Search
Login
Register
OBiTALK
OBiTALK Community
>
General Support
>
Installation and Set-Up (Devices)
>
Help to config Obi300 using PSTN line into phone port with Polycom Trio 8800
Pages: [
1
]
« previous
next »
Print
Author
Topic: Help to config Obi300 using PSTN line into phone port with Polycom Trio 8800 (Read 5189 times)
Kaayyn
Newbie
Posts: 7
Help to config Obi300 using PSTN line into phone port with Polycom Trio 8800
«
on:
December 28, 2018, 09:00:15 pm »
Hi,
I want to use the Obihai 300 with the Polycom Logo as a FXO gateway, is this ok?
The PSTN line connect on Obi300 phone port (Obi300 has only 1 phone port). Follow my step:
Service Providers -> ITSP Profile D SIP -> ProxyServer : 127.0.0.1
Voice Services -> SP4 Service -> AuthUserName : OBi300
Voice Services -> SP4 Service -> AuthPassword : 123456
Voice Services -> SP4 Service -> X_RegisterEnable : (unchecked)
Voice Services -> SP4 Service -> X_ServProvProfile : D
Voice Services -> SP4 Service -> X_Proxy: Checked
In Polycom,
IP Porxy address: 172.16.1.158 ( IP address of OBi300)
Port: 5063 ( Follow X_user_agent port on SP4)
Domain: 172.16.1.158
User: OBi300
Password: 123456.
The problem is, my Polycom IP phone cannot register to Obi300.
If Obi300 can be use as FXO gateway, please show me what i missed for register, call routing for this case.
Thank you,
Logged
drgeoff
Hero Member & Beta Tester
Posts: 5539
Re: Help to config Obi300 using PSTN line into phone port with Polycom Trio 8800
«
Reply #1 on:
December 29, 2018, 02:08:30 am »
The port marked PHONE on any OBi
cannot
be used as an FXO port. Plugging a PSTN line into it is likely to cause permanent damage to the OBi.
Only the LINE port of an OBi110, OBi212 or OBiLINE is an FXO port and designed for connection to a PSTN line.
«
Last Edit: December 29, 2018, 02:11:17 am by drgeoff
»
Logged
Kaayyn
Newbie
Posts: 7
Re: Help to config Obi300 using PSTN line into phone port with Polycom Trio 8800
«
Reply #2 on:
December 30, 2018, 06:17:45 pm »
Hi drgeoff,
Noted,
But could you help me, why follow my step, still cannot register the Polycom Phone to Obi300 device. If i plug the Obiline into Usb port, please show me how to route the call in/out to SP4.
Thank you.
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
Firmware, Software Updates
-----------------------------
=> Firmware / Advisories / Notifications for OBi Products
-----------------------------
General Support
-----------------------------
=> On-Topic: Obihai and OBi Products
=> Installation and Set-Up (Devices)
=> Day-to-Day Use
=> New to Using the OBi / VoIP
=> OBiTALK Web Portal
=> Feature Requests
-----------------------------
Region Specific Technical / Service Provider Support
-----------------------------
=> North America - Including Google Voice, Skype, etc.
=> Australia, New Zealand and the Pacific Islands
=> Asia (Continent)
=> Europe (Continent) & Africa (Continent)
Loading...