Outgoing Calls Disconnect Before Ringing - Obi 1062 and ObiLine

<< < (2/2)

drgeoff:
Quote from: KALtx on January 09, 2019, 09:36:00 am

Yes, call history shows the correct line and correct phone number being dialed.

Now, though, other intermittent problems are happening:

Now sometimes when I dial a number via the ObiLine/USB adapter line, I get automated messages from my land line provider. Sometimes it says "you must first dial an area code to complete your call" (I am definitely dialing a full seven digit phone number) and sometimes it says "AT&T operator assistance ..." And most recently, I get an automated message from AT&T giving me the time and date.

Other times I dial the number and it dials over the dial tone (instead of the dial tone going away once a number is dialed).

Other times, the same problem of dialing a number, the 1062 saying "trying" while I hear it dialing digits, then "Connected" with an immediate disconnect.

My first suspect is that your OBiLINE is faulty.  I assume you have tried unplugging power from the 1062 for 15 seconds.

KALtx:
Yes, have powered down phone and rebooted several times. My feeling is the ObiLine as well. I believe at this point I will try a new ObiLine and see if that corrects the problem.

ProfTech:
To KALtx: I have a brand new Obiline adapter still in it's package that I would like to sell at a good price. Send me a private message and I'll contact you.

Navigation

[0] Message Index

[*] Previous page