Incoming call ring silencing

<< < (2/2)

drgeoff:
Quote from: TTCP on January 09, 2019, 11:44:58 am

A regular old analog telephone connected to OBi200.

The ringing voltage is the only signal from the OBi that an onhook phone can respond to. There is no way that the OBi can tell the phone to flash lights but not ring.

However some phones have the facility to turn off the ringer.

azrobert:
Try: 60;(.1+59.9)

The phone I tested the above ring pattern had a chirp then displayed the callerid. It doesn't have any flashing lights.

Your phone might not ring.

This phone didn't display callerid using "60;(0+60)".

Navigation

[0] Message Index

[*] Previous page