3 Google Voices with FreePBX

(1/2) > >>

plc101man:
I have a FreePBX server connected with three google voice accounts (SP1, SP2 & SP3) and SP4 connected to my FreePBX all in an OBi200. The X_InboundCallRoute for SP4 I have like this:

{(7867539378):sp1},{(7405185092):sp2},{(7402402422):sp3}

I have three outgoing routes in my FreePBX and each one I force the CID depending on my dialing pattern, the first google voice accont (SP1) works fine but the other two say that the call cannot be completed as dialed.

Any help will be appreciated.

drgeoff:
"call cannot be completed as dialled" is an Asterisk message, not an OBi one.

Log in locally (ie not via the portal) to the OBi, click on Status, then on Call History.  That should show you what numbers the OBi has sent to FreePBX.  Compare the failures on SP2-3 with the successes on SP1.

plc101man:
You are right, after I fixed the outbound routes in FreePBX everything is working fine.

Thanks for your help.

plc101man:
One more thing, on the three google voice accounts when I dial a number, the number dialed only rings once and then a long pause until somebody picks up the phone or goes to voice mail.

??????

azrobert:
This is an early media problem. Bridging a call to an OBi device will break early media causing the no ringback problem. Calling 2nd GV number will fail when transferred to VM is another problem.

The fix is enabling X_EarlyICEEnableIn on the SP used to communicate with Asterisk.
See:
https://www.dslreports.com/forum/r31997421-Asterisk-How-to-turn-your-OBi20x-device-into-a-SIP-to-GVSIP-bridge

Click on the link in the 1st post.

I stopped using Asterisk after GV stopped working, so I haven't tried this fix. There are other suggested fixes on DSLReports, but I can't find them.

Navigation

[0] Message Index

[#] Next page