Google voice stopped working

(1/3) > >>

PsuFan:
Anyone else having problems with google voice? Was using obi1062 phone with google with no problems. All the sudden stopped working, tried the DNS fix, didn't work. Also have a obi202 using a different google voice account, it doesn't work either. Can make call to the echo test or obi call to the 202/1062.

I don't get any message making call. Nothing happens, forever. obitalk website says "Connected" to GV on both devices. Tried obi202 at different location, didn't work. Although it uses the same ISP.

SteveInWA:
I have three Google Voice numbers.  All three numbers are configured on four OBiTALK devices.  All work fine for inbound and outbound calling.  Nobody is reporting this symptom on the Google Voice help forum.

You mentioned trying the "DNS Fix".  There is various, conflicting advice on this.  Perhaps you made a mistake in the changes.  You should set your device's DNS to DNS1=8.8.8.8 and DNS2=8.8.4.4

PsuFan:
I did change my device's DNS to 8.8.8.8 and 8.8.4.4. It did not resolve the issue.

I cannot resolve my devices SIP ProxyServer "obihai.sip.google.com". They are also both set to ProxyServerPort 0.. NOT TO BE CONFUSED WITH OutboundProxy and OutboundProxyPort which are set to obihai.telephony.goog/443. Can you send your settings?

Can you give me any other troubleshooting steps? I get no errors or anything. My "SP1 Service Status" has all zeros all the time.

I even made a hotspot on my phone, connected via wifi on the 1062 and still had no GV. Made an obi call tho lol... (turned a desk phone in to a mobile phone because I used a 12v battery pack to power the 1062 because I was using PoE and didn't want it connected to the network!)

drgeoff:
Quote from: PsuFan on January 27, 2019, 07:35:54 am

I cannot resolve my devices SIP ProxyServer "obihai.sip.google.com". They are also both set to ProxyServerPort 0..

Both those sentences are normal.

PsuFan:
Okay, do I need to have a linked number (and have it forwarding) on my GV account for my obi to work?

Edit: I factory reset the 202, the device didnt leave my obi account. Tried to configure GV, "Configuring" forever, then "Service not configured"

Quote from: SteveInWA on July 11, 2018, 07:39:57 pm

Your OBi device needs to be running the latest build of the firmware, which, as of today, is 3.2.2 (Build: 5898EX).
....


How did you get 3.2.2? I'm running 3.2.1 and it says its the latest.
https://www.obitalk.com/forum/index.php?topic=9.0

Navigation

[0] Message Index

[#] Next page