Cisco SPA525G2 can not dial out with OBi202

<< < (2/2)

RFC3261:
In addition to following azrobert's directions, I also recommend putting the <flat-profile> for the Cisco phones on your tftp servers for the phones to load based on the DHCP responses so that it is easy to configure/upgrade/reset them.

btw, Cisco is dropping SW support for that IP phone in about a year (it will still work as good as it currently does after that date, but no future software or security fixes), so you may wish to start looking at your options, which may depend on your ITSP (some may support some phones without an intervening OBixxx device. and the less complex the environment, typically the more reliable/better).

NickS:
Quote from: RFC3261 on February 09, 2019, 08:12:12 pm

In addition to following azrobert's directions, I also recommend putting ...


Thanks a lot for the suggestions.

Navigation

[0] Message Index

[*] Previous page