News:

On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

can I route GV to _both_ PSTN port and sip ?

Started by seandarcy, February 14, 2019, 06:32:59 AM

Previous topic - Next topic

seandarcy

I'm setting up an obi202. I've got GV working on sp1, which is routed to sp3. That works.

We also have an analog phones that I'd like to connect to a PSTN port, and have an incoming GV call route to sp3 and ring the analog phone. How can I do this ?

Thanks for any help.

azrobert

Did you do the following to route calls to SP3?
Voice Services -> SP1 Service -> X_InboundCallRoute: sp3

If that is what you did, change it to: sp3,ph

seandarcy

Thanks for the quick response.

Yes. sp3(mygvnumber). (Do I need to include my gv number ?)

So I'd change that to "sp3(mygvnumber),ph"  ?

Does that ring both tel ports ? Can I use ph1 or ph2 to route to a specific port ?

azrobert

Quote from: seandarcy on February 14, 2019, 07:25:30 AM
So I'd change that to "sp3(mygvnumber),ph"  ?

Correct.

To ring both phone ports:
sp3(mygvnumber),ph,ph2

ph and ph1 both point to Phone1.

seandarcy

Maybe it's already done ???

From the Dashboard -> Device Configuration SP1:

SP1: Google Voice - OBi202
Configuration Name                       GV-<my number>
Primary Line for Outgoing Calls     [check]  Phone 1   [    ] Phone 2
Incoming Calls Will Ring On           [check]  Phone 1   [    ] Phone 2

I may not need to change X_InboundCallRoute

I'll check it out.