My network consists of the OBI100 connected to a local router that is connected to a Ubiquiti antenna connecting to a remote router. The only thing that changed was the antenna config to connect to a different remote router. The OBI 100 talks to a remote OBI 200 via OBITALK. This system has worked for maybe 9 months. Nothing changed relative to the OBIs and the first call I made today under the new antenna config worked fine. Now, the middle LED on the OBI 100 is not constant on - it blinks on periodically. If I make a call to another of my GV numbers, after 4 rings I get the error message. HOWEVER, when I look at my Gmail account for that phone I see a missed call. If I call a none GV # sometimes it rings 4 times, sometimes once, and sometimes goes directly to the error message. The network is connected as I am currently using it for this message.
Where do I look? It isn't the OBI config (it is the same as it has been), it isn't the network (it is connected), it isn't the GV number (it is showing a missed call}.