Outgoing call as company extension

<< < (2/2)

azrobert:
Any number dialed on the OBi200 will be routed out the OBi202's SP1. This setup uses the OBiTalk network to route calls between the boxes, therefore the OBiTalk network must be functioning.

Routing calls to SP2 or SP3 will require a prefix on the dialed number. You can use a single digit, 2xxxxxxxxxx routed to SP2 and 3xxxxxxxxxx routed to SP3. This will require additional code.

Use OBi Expert to make the following changes:

OBi202

Voice Services -> OBiTalk Service -> InboundCallRoute:
{(510222222|510333333):sp1},{ph}

Replace 510222222 with the OBi number of the OBi200#1
Replace 510333333 with the OBi number of the OBi200#2

All OBi200's

Physical Interfaces -> Phone Port -> OutboundCallRoute:
The 1st rule is: {([1-9]x?*(Mpli)):pp}
Change it to: {(<510111111*>(Msp1)):pp}

Replace 510111111 with OBi number of the OBi202

ho1230:
Thanks azrobert !

It works as what I want now.

But I got an other problem here now. Since you route all calls that from pp direct to sp1, how can I call frontdesk from those extensions?

azrobert:
I assume you assigned an extension number to the OBi202.

OBi202:
Voice Services -> OBiTalk Service -> InboundCallRoute:
{(510222222|510333333)>(Msp1):sp1},{ph}

Now dial the extension#

Also increase the max sessions.

Voice Services -> SP1 and OBiTalk Services -> MaxSessions: 6

ho1230:
It’s working now ^_^

Thank you so much

Navigation

[0] Message Index

[*] Previous page