How do I make the ringer silent?
ecb54:
I'm at firmware 3.2.2 Build 5898EX. Can you see what you have? I also have my original Obi100. I might unplug my 200 and configure the 100 with the provider (Phonepower) I'm trying to modify the ringtone on and see what happens.
azrobert:
I'm at 5921. I've played with ring patterns for a long time using several different firmware versions and never had a problem.
http://fw.obihai.com/OBi202-3-2-2-5921EX-332148940.fw
azrobert:
I just had a thought. If the config is corrupted, maybe using Ring Profile B will work. Modify Ring Pattern 10 in Profile B then change the SP X_RingProfile to B.
ecb54:
It gets more interesting. I changed to Ring Profile B for SP2 and modified Ring Pattern 10 to what you recommended. Now I get 2 short rings on SP2, and no matter which Ring Pattern I choose (anything from 1 to 10) for Ring Profile B, it gives 2 short rings. I now have a choice-normal single ring or 2 short rings! At least I know which SP is ringing, although that wasn't my goal.
azrobert:
Profile B ring pattern 1 is double ring, so it appears your OBi is stuck on ring pattern 1. Try changing Ring Pattern 1 on profile B to no ringing.
Navigation
[0] Message Index
[#] Next page
[*] Previous page