setup Zoiper to work with Obi202

[Mike2012]

I'd like to make calls using Zoiper on iphone and these calls should go through my Obi202 set up to use GV.

I used steps at this page to do this setup-
http://www.obitalk.com/forum/index.php?topic=8886.0

Now when I dial a number in Zoiper, I get 404 not found error. How can I fix that?

[Mike2012]

syslog shows this line-

2019-03-23T22:00:12.005164-07:00 obi202.garage.lan  SIP/2.0 404 Not Found#015#012Call-ID: hxUGpK7tduYEk16WDjtqkw..#015#012CSeq: 2 INVITE#015#012Content-Length: 0#015#012From: <sip:1001@192.168.2.58:5061;transport=UDP>;tag=750e7857#015#012To: <sip:411@192.168.2.58:5061;transport=UDP>#015#012Via: SIP/2.0/UDP 73.170.38.130:46849;branch=z9hG4bK-524287-1---c3c35df2ead7698b;received=192.168.2.64;rport=46849#015#012#015

[SteveInWA]

If you have an iPhone, it's pointless to do that.  Just install and use the official Google Voice iOS app.  Google Voice now defaults to calling via VoIP, so if your concern is to not use carrier minutes, you're all set.

https://itunes.apple.com/us/app/google-voice/id318698524?mt=8

[Mike2012]

Yes, this is a better solution.
Thanks Steve!