OBI 202 CONNECTED, echo test okay, dial tone but no sound

<< < (2/2)

drgeoff:
Quote from: jakeinpdx on April 13, 2019, 01:41:21 pm

SteveinWA
3) Re-add the device to your OBiTALK portal dashboard, using the **5 xxxx procedure.  At this point, it may automatically update the firmware on the device.  It needs to be 3.2.2.5921 or higher to work with Google Voice.
DONE but the build says: SoftwareVersion   3.2.1 (Build: 5757EX)

Stop here and reply if you can't get this far (device deleted, factory-reset, re-added and firmware updated).edure.
DONE

3.2.1 Build 5757 is lower than 3.2.2 Build 5921. Try again.

If it will not update the firmware automatically you can do it manually.  The procedure is detailed under 'Option 3' in http://www.obitalk.com/forum/index.php?topic=9.0.  Be sure to read the notes about 202/302.

jakeinpdx:
Thanks for your assistance, I went through and disconnected the device from the account. Opened the WAN port, updated the firmware and received back this response "Previous version identical to the update. Firmware not modified."

I then went back and tried the phone and it dialed out!

So it worked.... Thanks

Navigation

[0] Message Index

[*] Previous page