How to call from Obi202 to another Obi202 SP4 only

(1/1)

bluemarble:
I have tried the linked device trick 20# and dial the obi number **9 and the 9 digit method. The other obi202 will ring all the phones in both ports. Is there a away to only ring to a specific SP that connects to a particular phone e.g. SP4?

azrobert:
The Linked Device will just setup a speed dial to call an OBi Number.
In addition to calling, you can also pass data.

Define 2 speed dials as:
pp(510123456*1)
pp(510123456*2)

Replace 510123456 with the OBi number of the receiving OBi202.
In the receiving OBi202 use Obi Expert to make this change:

Voice Services -> OBiTalk Service -> InboundCallRoute:
{>1:ph},{>2:ph2},{ph,ph2}

Edit:
Use the above speed dials to ring a single phone port. Use the Linked Device speed dial to ring both ports.

bluemarble:
OK thanks.

Navigation

[0] Message Index