Cisco 7965G IP Phone connecting to the obi200

[joah088]

Will the Cisco 7965G IP Phone work with the obi200 if so how do I connect/setup the phone with my obihai device?

[drgeoff]

Will the Cisco 7965G IP Phone work with the obi200 if so how do I connect/setup the phone with my obihai device?

What are you trying to achieve?

[joah088]

To Be able to use it as a regular like home phone, I have it left over from my office 

[azrobert]

See:
http://www.obitalk.com/forum/index.php?topic=12492.0

Use OBi Expert to make the config changes.

There is a bug in the firmware that causes some devices to fail registration.
Go to:
Status -> System Status
Scroll down to SP4
If the 7965G is registered, its IP address will be displayed.

If it's not registered, do the following:

Change to 7965G to not register. Not all phones have this option.

Voice Services -> SP4 Service -> X_Proxy: Unchecked
Voice Services -> SP1 Service -> X_InboundCallRoute:
ph,sp4(OBi200@xx.xx.xx.xx:pppp)
Replace xx.xx.xx.xx:pppp with the IP address and port of the 7956G

[joah088]

Also what port does it get plugged into?

[ShazamInForum]

If you are unable to follow azrobert's information and instructions, then by all means, do not use your CISCO IP Phone.

Get a simple corded analog phone at Walmart, connect that phone to the OBi200 device phone port.

Or, get OBi Phone instead, go here:  https://www.obitalk.com/info/products/obi1032


Good luck!