Cisco 7965G IP Phone connecting to the obi200

(1/2) > >>

joah088:
Will the Cisco 7965G IP Phone work with the obi200 if so how do I connect/setup the phone with my obihai device?

drgeoff:
Quote from: joah088 on June 01, 2019, 07:42:39 pm

Will the Cisco 7965G IP Phone work with the obi200 if so how do I connect/setup the phone with my obihai device?

What are you trying to achieve?

joah088:
To Be able to use it as a regular like home phone, I have it left over from my office 

azrobert:
See:
http://www.obitalk.com/forum/index.php?topic=12492.0

Use OBi Expert to make the config changes.

There is a bug in the firmware that causes some devices to fail registration.
Go to:
Status -> System Status
Scroll down to SP4
If the 7965G is registered, its IP address will be displayed.

If it's not registered, do the following:

Change to 7965G to not register. Not all phones have this option.

Voice Services -> SP4 Service -> X_Proxy: Unchecked
Voice Services -> SP1 Service -> X_InboundCallRoute:
ph,sp4(OBi200@xx.xx.xx.xx:pppp)
Replace xx.xx.xx.xx:pppp with the IP address and port of the 7956G

joah088:
Also what port does it get plugged into?

Navigation

[0] Message Index

[#] Next page