Help setting up gateways for Onesuite and Callcentric

<< < (3/3)

VOIPisGreat:
Any new confirmation that if Onesuite works in gateway or not?

I tried to set it up last night. When I tried to dial out it's just complete silence. Checking call history from obi it looked as if the call in progress, but call history from onesuite show the call didn't exist.

RonR:
Quote from: VOIPisGreat on May 15, 2012, 10:56:30 am

When I tried to dial out it's just complete silence. Checking call history from obi it looked as if the call in progress, but call history from onesuite show the call didn't exist.


The OBi Call History never displays calls that are in progress.  The OBi Call History only displays past calls.

The OBi Call Status displays any calls that are currently in progress.

VOIPisGreat:
Quote from: RonR on May 15, 2012, 11:10:40 am

Quote from: VOIPisGreat on May 15, 2012, 10:56:30 am

When I tried to dial out it's just complete silence. Checking call history from obi it looked as if the call in progress, but call history from onesuite show the call didn't exist.


The OBi Call History never displays calls that are in progress.  The OBi Call History only displays past calls.

The OBi Call Status displays any calls that are currently in progress.



Sorry, I wasn't being clear.

I dialed and only heard silence. Then I hung up and checked obi call history. It show <time> New Call <time> End Call for the period I got silence.  But onesuite call history didn't show anything. I got no error message of any kind.

RonR:
Did you first get OneSuite working on SP1 or SP2 to ensure you're using all the correct OneSuite information?

Are you using a configuration similar to the following (this example uses VG3)?:


Voice Gateway3
Name : OneSuite
AccessNumber : SPx(voip.onesuite.com)
DigitMap : (<1aaa>[2-9]xxxxxx|<1>[2-9]xxxxxxxxx|1xxxxxxxxxx|011xx.)
AuthUserID : username-voip.onesuite.com
AuthPassword : password

where SPx is configured for SIP and aaa is your local area code.


Physical Interfaces -> PHONE Port -> DigitMap : ...|**3(Mvg3)|...

Physical Interfaces -> PHONE Port -> OutboundCallRoute : ...{(<**3:>(Mvg3)):vg3},...

Navigation

[0] Message Index

[*] Previous page