I updated firmware to 1.3, no change.
Some more tests I have tried:
* I can call out using vg6 and SP2 using a
voip.ms subaccount.
* When I setup SP1 to Callcentric I can call out using a gateway on SP1 with a
voip.ms subaccount, but not a Onesuite, nor a Callcentric account.
I will try analyzing the traffic using Wireshark. My router is being too "smart" and Wireshark on my PC can not see the traffic between my Obi110 and
voip.ms.
=======================================================
Obihai support has been no help. I sent six support requests and I receive two replies:
---------------------------------------------------------------------
We believe your e-mail request was about gateway calling.
Please take a look at the OBi Admin Guide for how gateway calling works.
http://www.obihai.com/OBiAdminGuide.htm#_Toc288059330 ---------------------------------------------------------------------
When you set up GW3 and GW4, it is not possible to dial it via **3 or **4,
it needs to be done via the Phone OUTBOUNDCallRoute parameter.
The **1 is for SP1, **2 for SP2, **8 for LandLine, **9 for OBi to Obi call,
the rest of the ** is not routable to gateways.
Please read through the Obihai admin guide, or check the Obihai forum for
guidance.