2 OBis, 1 SP1, both ring, one out

(1/3) > >>

zzzxxx:
Hi all,

I have an OBi 110 at home, VOIP provider on SP1, only line, nothing connected to outgoing telecom line.  All OK.  I have a second OBi 100 that I want to take to Mexico.  I want both OBis to ring on incoming calls, and both OBis to phone out on my OBi 110 at home.  Prefer both act exactly the same, no ** codes, etc.  I have the OBi 110 at home setup for 7 digit local calling, all OK.  Would like both to retrieve voice messages from my VOIP provider (VOIPmyway) the same.  I am not really technically astute, but got this far without too much trouble.  Thanks for any help.  This forum is really helpful.

Jack

RonR:
OBi110:

Voice Services -> SP1 Service -> X_InboundCallRoute : {ph,pp(ob300123456)}

Voice Services -> OBiTALK Service -> InboundCallRoute : {300123456>(Msp1):sp1},{300123456:aa},{ph}

where 300123456 is the OBiTALK number of the OBi100.


OBi100:

Service Providers -> ITSP Profile A -> General -> DigitMap:

(<2*>(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|<1aaa>[2-9]xxxxxx|011xx.|xx.|(Mipd)|[^*]@@.))

where aaa is your local area code.

Physical Interfaces -> PHONE Port -> OutboundCallRoute:

{([1-9]x?*@@.):pp},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},
{(<**2:>(Msp2)):sp2},{(<**9:>(Mpp)):pp},{(Mpli):pli}

Physical Interfaces -> PHONE Port -> PrimaryLine : SP1 Service

User Settings -> Speed Dials -> 2 : PP(ob200123456)

where 200123456 is the OBiTALK number of the OBi110.



Incoming calls to SP1 of the OBi110 should also ring the OBi100.  The first to answer wins.

Dialing from the OBi100 should be the same as from the OBi110 and go out SP1 of the OBi110.

Dialing Speed Dial 2 (2#) from the OBi100 should get the Auto Attendant of the OBi110.

zzzxxx:
Thanks Ron.  I tried this, and it sort of worked, but lots of cutouts during conversation.  Can I setup both OBis the same, and just unplug the one at home, and plug in the one in mexico?  Will the one in mexico function just like the one at home?

thanks,
Jack

RonR:
Jack,

Are you testing this with both OBi's behind the same router?  If so, if might be worth taking the OBi100 to a different location to simulate your real objective.  Some routers don't handle two VoIP devices well without some tweaking.

There shouldn't be any cutouts in the conversation.  The forwarding is being done over Obihai's OBiTALK network which has been experiencing a lot of difficulties the past week or so (including right this minute).

I don't know whether you'd have any problems accessing Google Voice directly from Mexico.

zzzxxx:
Hi Ron,

I did test the OBis at different locations:  The 100 at work, and the 110 at home.  Both have highspeed internet.  Maybe it was due to the issues with the OBiTALK network.  I will try again next week.

I am not using Google Voice, I am using VoIPMyWay.  Any idea if that service will work directly through Telmex?  I tried sending VoIPMyWay an email asking this question, but I received no response.

thanks again,
Jack

Navigation

[0] Message Index

[#] Next page