Will OBi select 2nd GV account to call out if SP1 is unavailable?

<< < (2/4) > >>

jazzy:
Thanks RonR, I'll give that a try.
So I will still set up this first, right?

System Management -> Auto Provisioning -> ITSP Provisioning -> Method : Disabled

Service Providers -> ITSP Profile A -> General -> Name : Google Voice
Service Providers -> ITSP Profile A -> General -> SignalingProtocol : Google Voice

Voice Services -> SP1 Service -> AuthUserName : (Google Voice #1 username)
Voice Services -> SP1 Service -> AuthPassword : (Google Voice #1 password)
Voice Services -> SP1 Service -> X_SkipCallScreening : (checked)

Voice Services -> SP2 Service -> AuthUserName : (Google Voice #2 username)
Voice Services -> SP2 Service -> AuthPassword : (Google Voice #2 password)
Voice Services -> SP2 Service -> X_SkipCallScreening : (checked)

Then make these changes too?

Service Providers -> ITSP Profile A -> General -> DigitMap : (Mste)

Service Providers -> ITSP Profile B -> General -> DigitMap : (Mste)

Voice Services -> Gateways and Trunk Groups -> Trunk Group1 -> Enable : (checked)

Voice Services -> Gateways and Trunk Groups -> Trunk Group1 -> TrunkList : sp1,sp2

Voice Services -> Gateways and Trunk Groups -> Trunk Group1 -> DigitMap : (Mste)

Physical Interfaces -> PHONE Port -> PrimaryLine : Trunk Group 1

User Settings -> User Defined Digit Maps -> User Defined Digit MapX -> Label : ste

User Settings -> User Defined Digit Maps -> User Defined Digit MapX -> DigitMap:

(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|<1aaa>[2-9]xxxxxx|011xx.|(Mipd)|[^*]@@.'@'@@.)

This DigitMap will send all 7 and 10 digit calls to GV, right?

RonR:
Correct.  The 'ste' DigitMap supports 7-, 10-, and 11-digit dialing and 011+ international.

jazzy:
RonR, when setting up the first part:

System Management -> Auto Provisioning -> ITSP Provisioning -> Method : Disabled

Service Providers -> ITSP Profile A -> General -> Name : Google Voice
Service Providers -> ITSP Profile A -> General -> SignalingProtocol : Google Voice

is there a need to set this up?
Service Providers -> ITSP Profile B -> General -> Name : Google Voice
Service Providers -> ITSP Profile B -> General -> SignalingProtocol : Google Voice

or leave it as defaut?

RonR:
Both Google Voice accounts can share/use ITSP Profile A, so ITSP Profile B isn't needed.

Which means I listed an unnecessary change:

Service Providers -> ITSP Profile B -> General -> DigitMap : (Mste)

jazzy:
Thanks RonR, for clearing that up.

If I only want SP1 GV# to ring the attached phone, can that be done by logging into SP2 GV#2 on Google Voice
and unchecking 'forward calls to Google Chat'

Navigation

[0] Message Index

[#] Next page

[*] Previous page