Obihai 302 Port 1 and Port2 Hunting

(1/1)

bcody:
Is there a way inside the Obihai 302 gui to create a hunt group so if port1 is busy it rolls to port2 assuming that both ports are programmed?

azrobert:
Just forward the call to Phone2 when Phone1 is busy. You also need to disable Call Waiting, otherwise the OBi won't recognize a busy. Use OBi Expert to make the following changes:

Voice Services -> SP1 Service
CallForwardOnBusyEnable: Checked
CallForwardOnBusyNumber: ph2

Physical Interfaces -> Phone1 Port
CallWaitingEnable: Unchecked

The same forwarding parms are found on the Phone Port. You might want to make the changes there, depending on how you want to handle the forwarding.

Navigation

[0] Message Index