Firewall Issue

[dbox]

Can someone check the firewall port requirements?

If I enable all ports, everything works.

If I only open the ports listed at
https://www.obitalk.com/info/faq/Troubleshooting-sec/ports-to-keep-open-on-my-router
my Google Voice eventually disconnects and shows offline, reconfiguration fails,
and the Obi Expert Configuration can't look up the status of my device.

[Sheffield_Steve]

Most consumer grade routers work just fine with the default settings.

You mention firewall, what model is it?

[drgeoff]

Most consumer grade routers are NAT routers and do not have firewalls in the usual professional sense.

[dbox]

I'm running pfSense 2.4.4... so yes, it's a firewall.

The article lists the following ports:

Allow Outgoing:
TCP Ports: 6800, 5222, 5223
UDP Ports: 5060, 5061, 10000 to 11000, 16600 to 16998, 19305
Allow Incoming on UDP Port: 10000


I'm hoping someone from OBi can actually provide updated technical requirements
so I don't have to sniff the traffic.

[drgeoff]

My GV Service Provider, SIP page is showing Port 443 against OutboundProxyPort.  Try opening that in the firewall.

The FAQ page has not been updated since GV changed from XMPP.

[SteveInWA]

Here is the official, and up-to-date answer from Google:

https://support.google.com/a/answer/9206518?hl=en&ref_topic=9240668