I can't make the pbxExtension Application work with Obi110's

<< < (7/7)

acsscott:
That did it.  I can call all the offices by putting an 8 infront of the two digit station number.

Thanks for all your help.

We'll see how it goes.  If they don't upgrade the Obi110 to hookflash, I just might build my little DTMF detection box.

Scott

acsscott:
RonR,

The office to home Obi bridge setup seems to be working pretty good.  My only complaint would be that it takes 3-4 rings sometimes on the line at the office for the home Obi to start ringing the phone.  Once the home phone is picked up, the voice quality and delay is fine.  It's just the initial ring through delay.

It would be nice if the Office Obi cached the home Obi's connection information so that it didn't have to chase it down everytime through Obitalk.

Scott

RonR:
If you don't care about CallerID being passed from the office OBi's LINE Port to the home OBi's PHONE Port, I think you can shave 4 seconds off that delay with the following change to the office OBi:

Physical Interfaces -> LINE Port -> RingDelay : 0

acsscott:
Thanks.  I'll give it a try and let you know.

Navigation

[0] Message Index

[*] Previous page