Obi202 - no dialtone
drgeoff:
Try another power supply if you have a suitable one. 12 volts DC, centre positive, ideally at least 800 mA but probably a lower current one would be OK for the short period to see if the power LED goes solid, the phone LEDs behave and dial tone returns. Dying PSU is a long shot but worth a try.
Angkor:
I forgot to add this - yes, i have tried it with another power chord, no change in results. thanks!
Angkor:
I just finished factory resetting once more, by depressing the button underneath. I gave it some time to do the reset.
Also, I have tried using another power cord, but didn't change anything.
Now,
- With just the power connected and nothing else, the Power LED keeps blinking and the Phone 1 LED keeps blinking green steadily. No other lights.
- Then I connected the ethernet cable to internet port, and in a few, the power LED is steady green. Internet/Data is flickering but green like how usually it is. Phone 1 LED still keeps blinking green steadily. Phone 2 doesn't have any light.
- Now I connected an old analog phone (had it from years ago, and it still works fine. I tested it on another device) line to Phone 2 port, and no dialtone. LED lights status does not change.
- I connected that analog phone line to the Phone 1, and same thing.
So this is the current status and in all indication, i think the Obi202 is toast! Any other ideas guys?
drgeoff:
Quote from: Angkor on July 25, 2019, 10:45:58 am
I just finished factory resetting once more, by depressing the button underneath. I gave it some time to do the reset.
Also, I have tried using another power cord, but didn't change anything.
Now,
- With just the power connected and nothing else, the Power LED keeps blinking and the Phone 1 LED keeps blinking green steadily. No other lights.
- Then I connected the ethernet cable to internet port, and in a few, the power LED is steady green. Internet/Data is flickering but green like how usually it is. Phone 1 LED still keeps blinking green steadily. Phone 2 doesn't have any light.
- Now I connected an old analog phone (had it from years ago, and it still works fine. I tested it on another device) line to Phone 2 port, and no dialtone. LED lights status does not change.
- I connected that analog phone line to the Phone 1, and same thing.
So this is the current status and in all indication, i think the Obi202 is toast! Any other ideas guys?
Have you ever had the OBi connected to house phone wiring?
Angkor:
Umm... what do you mean? I have connected it to a digital phone (4 handsets), and an analog phone for testing. sorry, didn't quite understand ya.
Navigation
[0] Message Index
[#] Next page
[*] Previous page