Power LED is Off
Shane_AZ:
I have a OBI202 and have been using it for few years. Today when I turned it on, the power LED first is RED for one second then blinking Green for maybe two seconds and then goes off and stays that way. So after a minute or so the LEDs are "Off-ON-Off-Off-Off". I have tried resetting, changing the network cable and using another power supply with no success. The OBITalk portal shows the device as 'Offline'. Anything else that I can try ? Thanks
SteveInWA:
See: https://www.youtube.com/watch?v=MH7KYmGnj40
Time for a new one. "No user serviceable parts inside."
IHEARTVOIP:
One thing you can try is to connect your browser to the OBi's local web page (get the IP address from your router's local DHCP connection table). Then download the latest OBi firmware for your model and use the web page that comes up to browse to the firmware file and then update the OBi device (similar to a manual upgrade).
This may bring your device back to life.
If you do not understand what the first paragraph means, then go here: https://www.amazon.com/OBi202-2-Port-Adapter-Support-Service/dp/B007D930YO
drgeoff:
Quote from: IHEARTVOIP on August 21, 2019, 10:08:25 am
One thing you can try is to connect your browser to the OBi's local web page (get the IP address from your router's local DHCP connection table). Then download the latest OBi firmware for your model and use the web page that comes up to browse to the firmware file and then update the OBi device (similar to a manual upgrade).
This may bring your device back to life.
If you do not understand what the first paragraph means, then go here: https://www.amazon.com/OBi202-2-Port-Adapter-Support-Service/dp/B007D930YO
The power LED being out can mean that there will be no access via ethernet.
Shane_AZ:
Quote from: drgeoff on August 21, 2019, 10:31:53 am
The power LED being out can mean that there will be no access via ethernet.
Right. I can't access it to try that.
Navigation
[0] Message Index
[#] Next page