Cannot Setup Cisco 7942 with Obi200
voipnewuser:
Quote from: azrobert on September 23, 2019, 10:23:31 am
Try the following for a test:
Voice Services -> SP4 Service -> X_InboundCallRoute: sp1
Do you have a Windows computer. You can test this setup with a softphone. This will narrow the problem to the IP phone if the softphone works.
I used PhonerLite, and it does successfully make the outbound call.
azrobert:
Did you try changing the inbound route to sp1?
voipnewuser:
Quote from: azrobert on September 23, 2019, 11:09:05 am
Did you try changing the inbound route to sp1?
Yes I did, and that's why it works when I used PhonerLite (softphone) to dial out.
I also just noticed that when I pull the LAN cable from Obi200, there is no dial tone on Cisco phone. Using wireshark, I do see that the cisco phone does attempt to dial out to destination IP 192.168.1.140 (Obi200). So at least the Cisco phone is attempting to dial out...
voipnewuser:
Does anyone have access to cisco download service contract? I would like to try the 8.3.5 firmware since someone reported that firmware was the last version that works.
azrobert:
An option is to get a $15 one-time fee account at PBXes.com. 2000 max minutes per month. If you're interested, I can give you more details.
Navigation
[0] Message Index
[#] Next page
[*] Previous page