OBI200: Configuring SP1 for outgoing and SP2 for incoming calls

(1/2) > >>

kunast:
Here is my challenge with OBI200 and Vtech phone:
SP1 - is Google Voice - "connected"
SP2 - is Anveo - "registered"
How the handset could be configured (or settings set via computer) to make Google Voice work for outgoing calls only while Anveo for incoming calls?
I would really appreciate hearing about any experience with making this right way.

azrobert:
Sign into your GV account.
Go to Settings (Click on the gear icon on the upper right).
Under Calls/My Devices turn off your OBiTalk Device.
Now GV inbound calls will not be routed to your OBi200.
Inbound Anveo calls routed to the OBi200 should be the default.

kunast:
Oh, thank you for replying! I appreciate it. However it looks like I didn't make myself clear enough. Sorry. Let me re-word my concern: what I am trying to find out is how to configure my OBI200 in such way - so SP1 (Google Voice) would be assigned for making all outbound calls (except E911) while Anveo (SP2) will work for all incoming calls + only E911 number that will be considered for outbound with Anveo. I would really appreciate your help.

azrobert:
Sign into your OBiTalk account.
Click on the gear icon to the right of your OBi200.
Click on the gear icon to the right of SP2.
Check the box for Emergency 911 calls.
Save

GV should be the default for all other outbound.

kunast:
Wow! Is it really that simple?! I thought it should go through special programming, codes and commands... Will try it right away.Thanks a billion!!!!!!!!!!!!!!!!!

Navigation

[0] Message Index

[#] Next page