OBI200: Configuring SP1 for outgoing and SP2 for incoming calls

<< < (2/2)

azrobert:
Quote from: kunast on September 26, 2019, 09:42:17 am

I thought it should go through special programming, codes and commands.


Actually, you are correct. Everything requires special programming. Some things you are able to supply a number or check a box and OBiTalk will do the programming for you. If you enter OBi Expert, you will be able to see the generated code.

kunast:
Well, I wouldn't go to expert programming tab, unless knowing exactly what to do - from the experts like you :) By the way, I've followed your recommendation (thanks!) and it seems all works well. Anveo accepts calls while GV sends them out. I am just a little bit confused with E911. I made a test call, thinking it will go out from my Anveo number. However, the person on the other end told she got a number starting with 267 area code, while my area code is 613. Is this supposed to be that way with E911? And yes - I double-checked the settings and E911 is set with Anveo only.

Navigation

[0] Message Index

[*] Previous page