GV stopped working. I tried to set up again, it was stuck on configuring.
I deleted the device and now I cannot add OBI200 back again.
I can log into the unit from the IP address (admin/admin) but for some reason the unit cannot be added.
No firewall is on. I opened all the ports.
Add an OBi Device
Failed to connect to your device. Please check your device's internet connection:
1. Check to be sure the OBi device's power LED solid green. If the power light (LED) is blinking green, that means the OBi can't get an IP address from your router. Verify the Ethernet cable is securely connected to the OBi and the router. If available check if there is a link light (LED) on the router port where the Ethernet cable connects. If the LED behavior appears to be faulty, try another Ethernet cable.
2. Can you call **9-222-222-222 ? If not, make sure your router's firewall is not blocking traffic from the OBi. Click Here for more.
3. If you are using a Westell / Actiontec router, you MUST disable the firewall. Click Here for more.
Click Try Again or click Cancel to return to the device list.