Phone without ring when using Callback Function

(1/2) > >>

Thunnderman:
After the latest firmware updated, I found my phone can't ring when I using the callback function. Please help.

Flow :
1. I used SP1 connected to the AA in one of Obi unit and using '3' to callback my mobile ny its line port.
2. My mobile rang and connected to AA
3. I presss '1' to connect the phone line but no ring happened so the other side people not awear and without pick up the phone, the phone screen shown a incoming call for sure.
4. The phone line keep ringing and won't be dropped until I make another call by another mobile to the other side people to pick up the phone or reboot the OBI unit.

I used the same flow in the past firmware without any problem so I suspected something changed in the lastest firmware created this issue.

RonR:
Your problem is 100% reproducible here.

Now all you have to do is convince Obihai that it's worth fixing.

tome:
You should not use the Obi in this application.  I have thoroughly tested this work-around. 
...
If this suggested work-around does not work for your application, there is no solution.


;D ;D ;D
I am killin' myself  :D :D
I know, I shouldn't have, but I couldn't resist.  I feel like I am about to get sent to the principal's office. :) 
Tom

infin8loop:
Bug reports? 10, 9, 8, 7, 6, 5, 4, 3, 2, 1 What bug reports?

http://www.youtube.com/watch?v=Jk7WuvNKe_g

Call routing for RonR's problem reports:

http://www.youtube.com/watch?v=yZXZAlfykpo

RonR:
Obihai Technology,

The problem Thunnderman described may be related to the Auto Attendant Callback problem I reported to you via email on 8/1/2011 that you acknowledged on 8/2/2011 but did not fix.  I followed up with you on 8/7/2011 after receiving the first release of v1.3, but never heard from you again.


Email sent to "Obihai Support Team" <support@obihai.com> on 8/7/2011:

In v1.3, the PHONE Port does not ring even though the Auto Attendant is attempting to call it.  This goes on indefinitely with the PHONE Port in a busy state.  The only way to stop the Auto Attendant is to take the PHONE Port off-hook (which isn't ringing) or power cycle the OBi.

At 11:42 AM 8/2/2011, you wrote:
We are able to duplicate this and we have added it to our bug list.

-Obihai Support Team

-----Original Message-----
From: RonR
Sent: Monday, August 01, 2011 11:48 PM
To: Obihai Support Team
Subject: Auto Attendant Callback Failure

1. Dial Auto Attendant (**0)

2. Select Option 3 (Callback)

3. Enter 0# (to have the Callback come to the PHONE Port) and hang up

4. Answer incoming Callback

A buzz (or occasionally silence) is heard upon answering the callback.

Navigation

[0] Message Index

[#] Next page