3rd party apps development for the OBi 110/100

<< < (3/5) > >>

QBZappy:
bhasden,

No joy.

Does the firmware version of the OBi make any difference?
I am calling from an OBi100 (1.3.0 Build: 2532) to an OBi 110 (1.2.1 Build: 2384).
I am calling using 2 different GV numbers. OBi100 GV number to another OBi110 GV number.

GrowlerID config:
GVoice tab set to GV acct on the OBi110 (user name only, not using the full email address + GV PW)
Obihai tab set to IP of OBi110 + Pass Word

I compared the call history of GV and OBi device. Both show receiving call from OBi100 number. Difference is that OBi110 shows 11 digits (Peer Number with a "1" in front), GV shows 10 digits (call does not show preceeding "1")

Call goes to GV VM. What do you think?

bhasden:
Quote from: QBZappy on October 05, 2011, 12:05:03 am

bhasden,

No joy.

Does the firmware version of the OBi make any difference?
I am calling from an OBi100 (1.3.0 Build: 2532) to an OBi 110 (1.2.1 Build: 2384).
I am calling using 2 different GV numbers. OBi100 GV number to another OBi110 GV number.

GrowlerID config:
GVoice tab set to GV acct on the OBi110 (user name only, not using the full email address + GV PW)
Obihai tab set to IP of OBi110 + Pass Word

I compared the call history of GV and OBi device. Both show receiving call from OBi100 number. Difference is that OBi110 shows 11 digits (Peer Number with a "1" in front), GV shows 10 digits (call does not show preceeding "1")

Call goes to GV VM. What do you think?



When saving the configuration, do you get any errors? If the configuration saves, that means it was able to authenticate both the Obihai and the GV credentials.

QBZappy:
I press "Apply" get test notification, then "OK". No error messages.

bhasden:
Quote from: QBZappy on October 05, 2011, 08:03:31 am

I press "Apply" get test notification, then "OK". No error messages.


You should be good then. If you disable Growl notifications do you get the balloon notification when an incoming call occurs?

QBZappy:
Yes
Sorry I meant to say No. I don't get anything on an incoming call. Without Growl running pressing "Apply" gives me a different style of notification pop up.

Navigation

[0] Message Index

[#] Next page

[*] Previous page