Uniden phone is not ringing correctly. I get double ring like UK.

(1/5) > >>

grazzie:
I have an older Uniden phone set (TRU888) with my OBI200 and have tried just about EVERY combo of RingFrequency, RingVoltage, and RingWaveform settings in addition to the default Ringer settings to get my phone to ring correctly with incoming Callcentric calls (SP2).  Still unsuccessful.

Calls to Google Voice (SP1) ring normally.
Calls to Callcentric (SP1) get the double (UK) ring. This is driving me crazy.
Even calls routed from Google Voice to Callcentric get the double (UK) ring.

My old PAP2 worked fine with Callcentric (RingFrequency: 20, RingVoltage: 70 and Ring Waveform: Sinusiod) but Callcentric calls with the OBI200 are driving me nuts.

I like routing my incoming Google Voice calls through Callcentric because I get a Caller ID Name from Callentric's Phone Book. Otherwise, sending Google voice calls directly to the OBI200 always gets "Unknown Caller" for the Caller ID Name.

Any help will be greatly appreciated. Thanks.

Taoman:
Change SP2's X_RingProfile to be A instead of B.

Voice Services-->SP2 Service-->X_RingProfile

grazzie:
Thanks for the response. It didn't work.  Voice Services \ SP2 Service \ X_RingProfile from B to A. Save Changes.

No go.  This is with Default Ringer (RingFrequency, RingVoltage, and RingWaveform) settings.

EDIT:  BTW, I'm working in the OBiTalk Expert Configuration Menu.

Taoman:
Hmmm. What am I missing?

What is your current SP2 X_DefaultRing set to?

grazzie:
It's set to 1


(I set the X_RingProfile back to B when it didn't work)

Thanks so much.

Navigation

[0] Message Index

[#] Next page