Uniden phone is not ringing correctly. I get double ring like UK.
Taoman:
Wow. Something's screwy or I'm missing something.
You are absolutely positive the incoming calls are actually ringing on SP2 which is configured for Callcentric? Check your call history to confirm.
grazzie:
Thanks for helping me understand the distinctive ringing.
I pretty sure I have Google voice on SP1, Callcentric on SP2 and VOIP.MS (outbound calls only) on SP3.
EDIT: I'm going to double check my settings. The SP1 is pretty much a default config. SP2 setup was taken from the Callcentric page https://www.callcentric.com/support/device/obihai/obi202.
I'll try a different phone. Thanks so much for the attention given. If anything changes, I will let you know.
Taoman:
Quote from: grazzie on January 02, 2020, 06:09:24 pm
SP2 setup was taken from the Callcentric page https://www.callcentric.com/support/device/obihai/obi202.
Say what? You said you were using OBiTalk Expert Configuration Menu.
grazzie:
Was that wrong? Should I be configuring this from the local ip address?
Sorry. I mis understood you. I set everything in the Expert Config in the ObiTalk portal. I used the Callcentric help page to config SP2. Should I have not done that?
Taoman:
Quote from: grazzie on January 02, 2020, 06:21:31 pm
Was that wrong? Should I be configuring this from the local ip address?
Did you configure SP2 just using the settings from the Callcentric web page or did you actually follow the directions on that page which says to use the local ip address web page for the configuration?
Edit: just saw your edit. So you actually configured SP2 using the OBiTalk Expert Configuration Menu?
Navigation
[0] Message Index
[#] Next page
[*] Previous page