Uniden phone is not ringing correctly. I get double ring like UK.
grazzie:
I did NOT use the local ip address portal to configure anything except for a couple of things below. I used the ObiTalk Expert Config for almost everything.
Locally, I changed the login password and disabled ObiTalk Provisioning as requested by Callcentric because I couldn't find ObiTalk Provisioning in the ObiTalk Expert Config
Taoman:
Quote from: grazzie on January 02, 2020, 06:33:49 pm
Locally, I changed the login password and disabled ObiTalk Provisioning as requested by Callcentric.
At what point did you disable ObiTalk Provisioning?
grazzie:
From the beginning when I setup the device when I followed Callcentrics settings but probably near the middle of my configuration process for SP2. I've had the distinctive ring on incoming SP2 calls since I've had the device. I had no other issue except for the ChannelRxGain being too high which is now set to -9.
Taoman:
Quote from: grazzie on January 02, 2020, 06:48:49 pm
From the beginning when I setup the device when I followed Callcentrics settings.. I've had the distinctive ring on incoming SP2 calls since I've had the device. I had no other issue except for the ChannelRxGain being too high which is now set to -9.
Go back to that Callcentric web page and Step 2 and read what it says in the bold red text.
The problem you are having is because you have disabled ObiTalk Provisioning. Nothing you are doing in ObiTalk Expert Config is having any effect because of this.
grazzie:
Oh no. See. That's why I'm posting in the Newb forum. Should I enable the ITSP Provisioning as well?
Navigation
[0] Message Index
[#] Next page
[*] Previous page