Uniden phone is not ringing correctly. I get double ring like UK.
Taoman:
Change X_DefaultRing to a different setting. Does it change the ring pattern?
grazzie:
I tried about 5 different numbers for X_DefaultRing and some with X_RingProfile on A and some on B.
No change.
SteveInWA:
You didn't change the ring profile from "B" to "A".
Remember: you must un-check both boxes to the right of the value in order to edit it, and you need to scroll down and click "Submit" to accomplish the change.
grazzie:
Quote from: SteveInWA on January 02, 2020, 05:55:23 pm
You didn't change the ring profile from "B" to "A".
Remember: you must un-check both boxes to the right of the value in order to edit it, and you need to scroll down and click "Submit" to accomplish the change.
I did change it. I changed it back when it didn't work. Thanks for the heads up. I'm aware of the boxes.
SteveInWA:
It helps to understand what is going on:
The double ring is not a mistake and it is not a UK tone. It is the USA "distinctive ring" pattern for line 2 in a 2-line phone system, or a true distinctive ring service POTS phone number. By default, SP2 uses the distinctive ring #2 pattern for SP2. By changing it to use ring profile A, it will use the same ring tones as SP1.
If it isn't working, then you've made some other mistake, or your ancient telephone is not responding properly to the ring signal. Try a different telephone.
Navigation
[0] Message Index
[#] Next page
[*] Previous page