Calling through linked device

<< < (2/2)

dlehtin:
With the new call rule {(<1:BC1234567>*(Mpli)):pp}
The phone in BC rings but the call does not go to the number dialed.

Ontario OBI
My primary line is SP1 using google voice lite (No number associated with the account).
SP2 uses google voice (Reno, NV phone number)
SP3  uses Callcentric (IP Freedom sip calling)

BC OBI
same set up as above
SP4 uses Freephoneline


Under ->Voice Services ->OBiTALK Services ->DigitMap ->(<ob>xxxxxxxxx|obxxxxxxxxx)

azrobert:
I assumed the outbound number was all digits.

BC OBi212
If all numbers begin with "+" followed by all digits, do this
{ON1234567>(+xx.):sp4},{ON1234567:ph}

Otherwise do this:
{ON1234567>(@@.):sp4},{ON1234567:ph}

Ontario OBi212
{BC1234567:ph}

You didn't hide your OBi numbers. Delete the call history from your post, I don't need them anymore. People that saw the OBi numbers can reach your OBi's. I changed the rules to prevent anyone, except your devices from ringing your phones.

azrobert:
If the "+" is only for GV, use another SP to validate the dial number.

BC OBi212
{ON1234567>(xx.):sp4},{ON1234567:ph}

Ontario OBi212
Physical Interfaces -> Phone Port -> OutboundCallRoute:
The 1st rule is: {([1-9]x?*(Mpli)):pp}
Change it to: {(<1:BC1234567>*(Msp3)):pp}

Physical Interfaces -> Phone Port -> DigitMap:
The 1st rule is: [1-9]x?*(Mpli)|
Change it to: (1*(Msp3)|

drgeoff:
I use a Voice Gateway on an OBi in Japan for it to call UK numbers through an OBi in the UK.

dlehtin:
I tried {ON1234567>(@@.):sp4},{ON1234567:ph} and everything seems to be working like I want.

Thank you.

Navigation

[0] Message Index

[*] Previous page