Obi Number, incoming works, outgoing doesn't
matc:
[Removed from wrong section and reposted here]
Hello. On Obi1032, from one day to next, cannot reach 2 OBi numbers, ends up with error 900. They, however, can reach my OBi Number. No firewall, no router changes. Stumped. Any ideas of where to begin looking? Sipgate is working fine in and out, just the OBi numbers that cannot be reached.
All configs are local, not through OBitalk.
matc:
Have reset, reconfigured, reloaded latest firmware, still 900 fail on both outgoing OBitalk OBi numbers. Anyone else having problems starting 2/3 days ago? Something needing changing on router?
matc:
Excuse me just blethering on here, talking to myself ... just to say that the echo service is working, all lights are green on the Obitalk dash, and have had remote units rebooted ... still nothing. Really hoping this is some sporadic issue withe the Obitalk servers.
azrobert:
Quote from: matc on February 08, 2020, 05:03:49 am
All configs are local, not through OBitalk.
Have all the devices been added to OBiTalk using **5xxxx?
Edit:
And removed and re-added from OBiTalk after reset?
matc:
Thanks for response. Yes, have done that a few times. Just now tried something different, removed the 1032 from OBiTalk, re-added it and then used Expert Configuration for the first time, rather than just local config.
Still not working on OBi Number. Sipgate working fine. Only difference I can see after using 'Expert' is that buttons 1 and 2 of the 8 are now unlit, but both lines are working.
Navigation
[0] Message Index
[#] Next page