Obi Number, incoming works, outgoing doesn't
matc:
Yes, OBi numbers being sent correctly **9 300 348 *** fails with 900, whereas **9 222 222 222 works just fine.
The 202 can reach both remotes on wired as well, so this is clearly something funky with the 1032. I've just factory reset it and pedantically followed the steps in the 'official' post, still the same ... **9 222 222 222 works, I can reach the 202 OBiTALK number, but neither of the remotes (an admittedly ageing 100 and a 110).
Utterly stumped, and very frustrated. This setup has worked, untouched, for years, nothing whatsoever has changed that I know of. Your help is appreciated.
azrobert:
I have an OBi1032 and an OBi110 and can call the 110. Check if you have current firmware. I have 4858EX (not latest) on the 1032 and 2886 on the 110.
matc:
4983EX.1311 on 1032
1.3.0 (Build: 2872) on 100 - is that old now, have not looked in a long while?
matc:
I see that it is newer, the last version. Will try updating as soon as there's someone physically 'at' the device. Cheers.
matc:
Aw well, 2886 loaded and still no difference. They can call me on OBiTALK, I cannot call them.
Looks like I need to try new devices.
Very very odd.
Navigation
[0] Message Index
[#] Next page
[*] Previous page