OBI202 and faxing

<< < (2/2)

Moonwalker:
It sounds like you're running your voice phone through your printer, which honestly doesn't make sense to me since you  shouldn't need to do that at all now that you have a 202. Am I misunderstanding this? If that's what your'e doing, plug the phone into port 1 on the OBI and your FAX into Port 2. Set them up as above. See if that works.

himpstergamer:
Quote from: Randall on May 28, 2020, 08:30:15 pm

Today I tried connecting the MFC to the other port on the Obi202.

It rang and I got the first part of the handshake - but then nothing.
check cps
A bit later (after it got tired of waiting, no doubt), it re-dialed.

Again, I got the first part of the handshake and nothing more.
click test games
(This is a step in the right direction - formerly I wasn't getting ANY of the handshake.)

Any ideas?

(Both ports are configured to use GV).


Look carefully at which is which. If they are backwards
the fax machine gets no line to use.

Navigation

[0] Message Index

[*] Previous page