Making SP2 default for outgoing calls (Obi 202)

[HelloG]

Hi all,

For years I've had just one Google Voice line on the Obi 200 as SP1. Today I added a second GV line on SP2. Now I'd like to set SP2 as the default outgoing line.

However, without using **2, the default is to use SP1 for outgoing calls and I see no place in the web interface to allow SP2 to be used.

One way I can think of is to delete the current SP1 and SP2 GV configurations and set it up such that the one I want as default outgoing is SP1, but I'm looking at this as an opportunity to learn more about the ObiExpert configuration.

I went into ObiExpert and poked around quite a bit, but could not find where to change the default outgoing line to SP2.  Could someone help me set this up?  There was one related thread with exactly the same subject, without a resolution.

Thanks.

[Taoman]

In OBi Expert:

Physical Interfaces-->Phone 1-->Phone Port-->PrimaryLine    (Set it to SP2)

You must uncheck both boxes to the right of the Value field in order to edit it.

Submit and save your changes.

[HelloG]

That worked perfectly. Thank you, @taoman.