Hello
I have a Obi 312 ATA set up with analog line on the FXO port. Incoming calls on the analog line ring with a normal North America ring cadence. Ring, 6 seconds off, Ring, 6 seconds off repeat.
The Obi 312 detects ring and follows its InboundRoute.. however 3 seconds later, in between bursts of ring voltage, it seems to think the call has ended and tears down the outbound call leg. Then when the ring cycles again, it places a new call all over again.
I am not sure what to adjust to get it to think multiple bursts of ringing + 6 second breaks is all the same call.. is there a timeout somewhere for this?
Here is what I am catching in syslog, it detects FXO ring and then logs NewCallOn.. messages where it's setting up the outbound legs per the InboundCallRoute rule. But 3 seconds after FXO ring is detected, it tears down the call legs. Repeat.
Jul 13 21:13:08
s01061cabc0b2a143.vc.shawcable.net [DAA]: FXO ring on
Jul 13 21:13:08
s01061cabc0b2a143.vc.shawcable.net CCTL:NewCallOn Term 1[0] ->,
Jul 13 21:13:08
s01061cabc0b2a143.vc.shawcable.net fxst_ccapi_new_call: -> name
Jul 13 21:13:08
s01061cabc0b2a143.vc.shawcable.net [SLIC] CID to deliver: ''
Jul 13 21:13:08
s01061cabc0b2a143.vc.shawcable.net CCTL:NewCallOn Term 10[0] ->,157143xxxxx;d=1
Jul 13 21:13:11
s01061cabc0b2a143.vc.shawcable.net RTP:Del Channel
Jul 13 21:13:11
s01061cabc0b2a143.vc.shawcable.net [DAA]: FXO ONHOOK MONITOR
Jul 13 21:13:12
s01061cabc0b2a143.vc.shawcable.net [CPT] --- FXS s/w tone generator (confirm) ---
Jul 13 21:13:12
s01061cabc0b2a143.vc.shawcable.net [CPT] tone compression done - 11561 !!
Jul 13 21:13:14
s01061cabc0b2a143.vc.shawcable.net [DAA]: FXO ring on
Jul 13 21:13:14
s01061cabc0b2a143.vc.shawcable.net CCTL:NewCallOn Term 1[0] ->,
Jul 13 21:13:14
s01061cabc0b2a143.vc.shawcable.net fxst_ccapi_new_call: -> name
Jul 13 21:13:14
s01061cabc0b2a143.vc.shawcable.net [SLIC] CID to deliver: ''
Jul 13 21:13:14
s01061cabc0b2a143.vc.shawcable.net CCTL:NewCallOn Term 10[0] ->,157143xxxxx;d=1
Jul 13 21:13:18
s01061cabc0b2a143.vc.shawcable.net RTP:Del Channel
Jul 13 21:13:18
s01061cabc0b2a143.vc.shawcable.net [DAA]: FXO ONHOOK MONITOR
Jul 13 21:13:21
s01061cabc0b2a143.vc.shawcable.net [DAA]: FXO ring on
Jul 13 21:13:21
s01061cabc0b2a143.vc.shawcable.net CCTL:NewCallOn Term 1[0] ->,
Jul 13 21:13:21
s01061cabc0b2a143.vc.shawcable.net fxst_ccapi_new_call: -> name
Jul 13 21:13:21
s01061cabc0b2a143.vc.shawcable.net [SLIC] CID to deliver: ''
Jul 13 21:13:21
s01061cabc0b2a143.vc.shawcable.net CCTL:NewCallOn Term 10[0] ->,157143xxxxx;d=1
Jul 13 21:13:24
s01061cabc0b2a143.vc.shawcable.net RTP:Del Channel
Jul 13 21:13:24
s01061cabc0b2a143.vc.shawcable.net [DAA]: FXO ONHOOK MONITOR
Jul 13 21:13:27
s01061cabc0b2a143.vc.shawcable.net [DAA]: FXO ring on
Jul 13 21:13:27
s01061cabc0b2a143.vc.shawcable.net CCTL:NewCallOn Term 1[0] ->,
Jul 13 21:13:27
s01061cabc0b2a143.vc.shawcable.net fxst_ccapi_new_call: -> name
Jul 13 21:13:27
s01061cabc0b2a143.vc.shawcable.net [SLIC] CID to deliver: ''
Jul 13 21:13:27
s01061cabc0b2a143.vc.shawcable.net CCTL:NewCallOn Term 10[0] ->,157143xxxxx;d=1
Jul 13 21:13:30
s01061cabc0b2a143.vc.shawcable.net RTP:Del Channel
Jul 13 21:13:30
s01061cabc0b2a143.vc.shawcable.net [DAA]: FXO ONHOOK MONITOR
Jul 13 21:13:31
s01061cabc0b2a143.vc.shawcable.net [DAA]: FXO ONHOOK MONITOR
Thanks in advance if anybody can help!
Mark Hagler
