Cannot create user defined digit map

(1/2) > >>

suyog:
I have Obi200 at home.  My service provider is Google Voice.
I want to define a digit map and use it to block incoming calls with phone numbers that match the digit map.  However I am not able to enter anything in the form that supports digit maps.
Here is the process I followed:
1. Login with my gmail account
2. Go to OBi Dashboard
3. click on "Advanced Configuration" (icon at far right)
4. Click on "User Settings"
5. Click on "User defined Digit Maps"
I can now see a form.  One digit map "ipd" is already defined.  I am not able to enter anything in the box labeled "Label".  I am also not able to enter anything in the box labeled "DigitMap".
Why am I not able to enter anything in this form?  Is this a permissions issue?  Is there a special "admin" login?  If so how do I login as admin?
Thanks in advance.

Taoman:
Uncheck both boxes to the right of the field you wish to edit.

suyog:
That worked.  Thanks a lot Taoman.
I defined a digit map named "blk" and its value is "140859xxxxx".

Now how do I use this to block all incoming calls starting with 140859* ?
Under "Physical Interfaces" I clicked "PHONE 1".
There is a OutboundCallRoute field but no InboundCallRoute field.
Should I edit the CallReturndigitMaps to use the newly created digit map "blk"?

Regards,
Suyog

drgeoff:
Quote from: suyog on August 28, 2020, 02:41:12 pm

That worked.  Thanks a lot Taoman.
I defined a digit map named "blk" and its value is "140859xxxxx".

Now how do I use this to block all incoming calls starting with 140859* ?
Under "Physical Interfaces" I clicked "PHONE 1".
There is a OutboundCallRoute field but no InboundCallRoute field.
Should I edit the CallReturndigitMaps to use the newly created digit map "blk"?

Regards,
Suyog

The InboundCallRoute configs are in the Voice Services pages.

See http://www.obitalk.com/forum/index.php?topic=13055.msg83657#msg83657

suyog:
Thanks, drgeoff.  You are very helpful.

I have defined a digit map called "blk" as follows:
(140859xxxxx | 1630322xxxx)

So the following setting should drop all calls from all 11 digit phone numbers starting with 1408859 and 1630322, but allow everything else.  Am I right?
X_InBoundCallRoute {(Mblk):},{ph}
Note that before I edited the X_InBoundCallRoute field, its value was just "ph" (without double quotes).
Regards,
Suyog

Navigation

[0] Message Index

[#] Next page