Obi200; Failed in setting SP3 for VOIP.MS & have quit trying.
vtsnaab:
Edit:
This proved to be a real nuisance considering the wasted time & efforts of myself, the other good members here, and the support staff at the ITSP.
Ultimately I set up a spare, wifi only Android phone for this via its native SIP client.
The steps are a bit twisted at the ITSP, but it does work & will be very good a a totally movable phone for this number.
Using it at SP3 would have been better, and should have just worked - but did not & enough is enough rather than trying things over & over with zero good results.
Thanks Again to the generous folks here for your efforts !!
Howdy Folks.
I'm trying to get my service at VOIP.MS to work via SP3 on my Obi200.
SP1 & 2 are 100% fine with GV accounts & I'm using the local IP address to access the settings.
(Auto provisioning is disabled as per the directions linked below.)
Tried this using the info found here:
https://wiki.voip.ms/article/OBi_100/110_%26_OBi_200
Also made a sub-account & attached it with the DID via ring group.
The Obi doesn't register at VOIP.MS.
I am doing this because my other phone (Panasonic SIP phone on the main account at VOIP.MS) is registering fine - will get incoming calls - but any number I dial out just gives a busy & I'd rather use the Obi anyhow.
Please help me get things working correctly ??
Thanks.
vtsnaab:
Wow.
Sorry about the inadvertent dupes for a minute - posting kept givin an error message, but it DID post after all.
Phew.
drgeoff:
The instructions assume that voip.ms is the only provider. Mention of Profile A is inappropriate for you with GV on SP1 and SP2. Check that you are using C with SP3.
vtsnaab:
Thanks for replying Drgeoff !!
Yes, I did notice that it is C & using that in both places.
(Unless simply transposing 1 & 2 vs. A, B, C, D is not enough & I missed it ??)
Sheffield_Steve:
You must set it up via the ObiTalk website portal. NOT the local IP web server.
Navigation
[0] Message Index
[#] Next page