Obi200; Failed in setting SP3 for VOIP.MS & have quit trying.
vtsnaab:
Slight addendum pertinent to all of this, I think:
I also tried adding an available 3rd GV account via the OBiTALK system wizard and even that didn't seem to reach the box here, despite having it set to be able to.
So - the only other option would be to do a total reset on the box & add in my long forgotten system settings in hopes that it might work...which I have no desire to do.
azrobert:
Did you disable OBiTalk Auto Provisioning? If this is disabled, configs will not download from OBiTalk. The default is Disabled.
Login locally and go to:
System Management -> Auto Provisioning -> Method
If disabled, change it.
Also, has the ConfigURL changed? This should NOT be at default.
drgeoff:
Quote from: azrobert on September 06, 2020, 11:08:04 am
Did you disable OBiTalk Auto Provisioning? If this is disabled, configs will not download from OBiTalk. The default is Disabled.
Login locally and go to:
System Management -> Auto Provisioning -> Method
If disabled, change it.
The setting is System Management/Auto Provisioning/Obitalk Provisioning/Method and the (wanted) default is "System Start". Page 97 of the Admin Guide https://www.obitalk.com/info/documents/admin_guide/OBiDeviceAdminGuide.pdf
vtsnaab:
Yep - 'tis what it says - just quadruple checked it right now.
All values have checkmarks in the default column except for this one:
FirmwareURL
Which contains this:
IF ( $FWV < 3.2.1.5757 ) FWU http://fw.obihai.com/OBi202-3-2-1-5757EX.fw
So it seems to me that the portal SHOULD be able to reach it - but it does not ?!?
drgeoff:
Quote from: vtsnaab on September 06, 2020, 12:59:58 pm
Yep - 'tis what it says - just quadruple checked it right now.
All values have checkmarks in the default column except for this one:
FirmwareURL
That is not consistent with what azrobert wrote.
Navigation
[0] Message Index
[#] Next page
[*] Previous page