Need help in OutboundCallRoute
RonR:
Quote from: infin8loop on October 20, 2011, 09:38:56 pm
And to really mess with our minds, with the "Default" check box checked (at this writing) setting for both SP1 and SP2 Service is X_ServProvProfile = A. Perhaps there is a good reason for this, but I can't think of one.
If both SP1 and SP2 are Google Voice accounts, they can share a single ITSP Profile (A or B). The same would be true for two VoIP accounts with the same provider (just different username/password's on each account).
infin8loop:
Quote from: RonR on October 20, 2011, 10:34:06 pm
If both SP1 and SP2 are Google Voice accounts, they can share a single ITSP Profile (A or B). The same would be true for two VoIP accounts with the same provider (just different username/password's on each account).
Thanks RonR. I actually thought of that scenario after I posted the message. But it still seems to violate the one-to-one association. IE: SP1=A and SP2=B. And what percentage of folks actually have the same provider on both SP1 and SP2 versus those that don't? As a default, sticking to the one-to-one seems more logical to me, but that's probably just me. I mentioned it only because it tripped me up. I configured google on SP1 when I received my OBi. Then later I added voip.ms on SP2 but missed and/or forgot to change the SP2 X_ServProvProfile from the default of A to B. It didn't take long to discover it.. but it was annoyance.
RonR:
infin8loop,
I could make a strong argument defaulting it your way (SP1=A/SP2=B) or the way Obihai did it. It seemed wrong to me at first also, and does trip a lot of people up. My guess is they figured more people would put two Google Voice (or VoIP) accounts on an OBi than would one of each.
Navigation
[0] Message Index
[*] Previous page