News:

On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

No Area Code showing in Caller ID when call is from home area code

Started by RichardC, September 01, 2020, 03:21:46 PM

Previous topic - Next topic

RichardC

Incoming calls from my home area code do not display the Area Code in the incoming Caller ID.  This is a real nuisance, because I need to dial all 10 digits to return a call.  Calls from other area codes display the complete 10-digit number as expected.  Is there a setting somewhere I have missed that will cause this?  Thanks.

drgeoff

Quote from: RichardC on September 01, 2020, 03:21:46 PM
Incoming calls from my home area code do not display the Area Code in the incoming Caller ID.  This is a real nuisance, because I need to dial all 10 digits to return a call.  Calls from other area codes display the complete 10-digit number as expected.  Is there a setting somewhere I have missed that will cause this?  Thanks.
I'm not aware of such a setting in an OBi.  Maybe your phone does?

azrobert

The following assumes you are using SP1 and SP1 is your Primary Line.

Configure your OBi to add area code when 7 digits are dialed.

Services Provides -> ITSP Profile A -> General -> DigitMap
Add the following after the beginning parenthesis:
<AAA>xxxxxxx|

Replace AAA with your local area code.