News:

On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

First GV call via Obi202, no audio in either direction

Started by NashWilliams, September 03, 2020, 06:00:01 PM

Previous topic - Next topic

NashWilliams

I've done a number of searches on this, but haven't found anything that addresses my experience.  Has anyone had an issue where they place a call through an Obi202 via Google Voice, and the first attempt has no audio for either party, yet the call is set up and the distant end party accepts the call, but all subsequent calls work perfectly?  (Apologies for the obvious run-on sentence!)

This is primarily with outbound calls.  Sometimes this happens with inbound calls as well, but not as frequently.

N7AS

You can try disabling SIP ALG in your router settings. This is the first thing to do when you are having problems with no audio or one-way audio problems.

Grant N7AS
Prescott Valley, AZ
https://www.n7as.com

A journeyman electrician sent his apprentice with a 5-gallon bucket and was told to put the ends of the service drop in the bucket and fill it with volts. He was there all day.