News:

On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

Hotline/ringdown to a Starcode

Started by SamF, September 07, 2020, 10:25:43 AM

Previous topic - Next topic

SamF

How can you have the device auto dial a starcode?

Tried Digitmap: (<:*55>)  but it sent *55 to sp1

drgeoff

Quote from: SamF on September 07, 2020, 10:25:43 AM
How can you have the device auto dial a starcode?

Tried Digitmap: (<:*55>)  but it sent *55 to sp1
I think it is not possible.  Star codes can only be entered from the phone port. See lines 3 and 4 of page 175 of the AdminGuide https://www.obitalk.com/info/documents/admin_guide/OBiDeviceAdminGuide.pdf.)

The OBi "sees" and actions them before dialled digits are given to Digit Maps so any manipulations/substitutions in a Digit Map are too late.

SamF

Thank you for that--

Can we some how do the action? in this case pg1 ?

drgeoff

Quote from: SamF on September 07, 2020, 12:02:12 PM
Thank you for that--

Can we some how do the action? in this case pg1 ?
What is pg1 ?

SamF


drgeoff

Quote from: SamF on September 07, 2020, 02:27:08 PM
Page Group 1

(to join a multicast)
Your brevity is not helping.  Even when I linked to the ATA Admin Guide you did not think to mention that you are asking about OBiPhone.

I have no experience of configuring or using Paging Groups.  I expect you can read the OBiPhone Admin Guide equally well as I can.  However from my quick look through it I see no mention of using any star code, never mind the specific *55 one you opened with, to join a Paging Group.

The AdminGuide does mention configuring a softkey to join/leave a Paging group.  See "Assignable Soft keys" pages 117/118.

SamF

@drgeoff

My apologies-

I set in star codes - Code 37  to *55,paging,pg1

If you dial *55 it will allow you to multicast across the network.

(voice services ---> Page Groups)

I want hot line dial to multicast.

Eva_Muller

thank you so much for the information