Callcentric and GV, having trouble with **2 with GV.
bobbobbob:
Hi JAmes,
Yes just signed up for CC today.. I made a call on it for about 60 min all was fine.. CC was the only voip on my obi110 at that time.. i deleted GV to put that on there.. as i wanted GV on SP2 and CC on SP1
it Stopped working ( it being Callcentric ) as soon as i put GV on as SP2...
im now getting : SP1 Service Status
Parameter Name Value
Status Register Failed: No Response From Server (server=204.11.192.23:5060; retrying)
again this is ONLY when i have 2 voip's running.. SP1 = Callcentric.. SP2 = GV
i remove my obi device.. re add it.. thus Clearing ALL sp's.. then i add back.. and ONLY add back CC... works fine.. after 12 reboots of the thing... I then Again add GV... it borks out w/
SP1 Service Status
Parameter Name Value
Status Register Failed: No Response From Server (server=204.11.192.23:5060; retrying)
bobbobbob:
im gonna open my own thread.. i dont want to Hijack this guys thread any more than i have to... i was just hoping his resolution would help me.. as the issues seem Very close.
RonR:
bobbobbob,
The OBiTALK Web Portal appears to be acting up lately and generating corrupt configurations.
You can configure the OBi directly by logging into the IP address returned by dialing ***1 and setting (from factory defaults):
System Management -> Auto Provisioning -> ITSP Provisioning -> Method: Disabled
System Management -> Auto Provisioning -> OBiTALK Provisioning -> Method: Disabled
SIP on SP1:
Service Providers -> ITSP Profile A -> General -> Name : (provider name)
Service Providers -> ITSP Profile A -> SIP -> ProxyServer : (proxy server)
Voice Services -> SP1 Service -> AuthUserName : (sip username)
Voice Services -> SP1 Service -> AuthPassword : (sip password)
Voice Services -> SP1 Service -> CallerIDName : (callerid name)
Google Voice on SP2:
Service Providers -> ITSP Profile B -> General -> Name : Google Voice
Service Providers -> ITSP Profile B -> General -> SignalingProtocol : Google Voice
Voice Services -> SP2 Service -> X_ServProvProfile : B
Voice Services -> SP2 Service -> AuthUserName : (Google Voice username)
Voice Services -> SP2 Service -> AuthPassword : (Google Voice password)
Voice Services -> SP2 Service -> X_SkipCallScreening : (checked)
Physical Interfaces -> PHONE Port -> PrimaryLine : (SP1 Service or SP2 Service)
JamesD:
Hi Bob
I did some screen caps of the settings that are working perfectly with Callcentric. I attached them to this reply, hope this works seeing it's the first time I'm uploading pics on here. :)
bobbobbob:
Thanks for the help James.. appreciate it..
Everything you posted looks the same.. Except.. the digi map....
this is mine :
(1xxxxxxxxxx|<1763>[2-9]xxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*]@@.)
Although its kinda a moot point atm.. I did what i "Think" is reseting the obi110.. and tried Just getting Callcentric back working.. but i seem to be going in and out of connectivity....
SP1 Service Status
Parameter Name Value
Status Register Failed: No Response From Server (server=204.11.192.35:5060; retrying)
is what im getting.. i dont know if this is part of the corrupt config stuff thats going on or not...... i have a ticket open w/ callcentric.. they seem to have VEry quick and responsive tech support.. they asked me to submit the Whole config i have for my obi110... There isnt a way to port the config to a txt file.. is there?.. that would be awesome... im having to send them saves of each page for them to look at..
so right now.. im not even bothering w/ GV as SP2.. im just trying to get callcentric to work again :p... CripeS! :)
Navigation
[0] Message Index
[#] Next page
[*] Previous page