obi 200 works for a little while an then goes to voice mail after some time
kucharosa:
Appreciate help on this. I have an obi 200 followed the sip settings see attachment. After reboot it shows registered and accepts incoming calls for an hour and then all calls after this time go straight to voicemail.
Sheffield_Steve:
Did you use the Obi dashboard to setup the account?
drgeoff:
The screenshot is from the GUI interface of the OBi's onboard web server. That is evident from the single column of tick boxes at the right hand side.
That would strongly suggest, but not prove conclusively, that the OP used the local configuration method. If so and if Obitalk Provisioning was not explicitly disabled the observed behaviour is completely normal.
See http://www.obitalk.com/forum/index.php?topic=61.msg109#msg109
Sheffield_Steve:
That's what I thought. If you don't use the Obi dashboard, are there any other settings that need to be changed?
Would it not be better to delete it and use the dashboard?
drgeoff:
Quote from: Sheffield_Steve on November 13, 2020, 11:14:52 am
That's what I thought. If you don't use the Obi dashboard, are there any other settings that need to be changed?
Would it not be better to delete it and use the dashboard?
Depends. I have one OBi within arms reach as I type this. I configure it using the onboard interface. Another OBi is many thousands of miles away. I use Expert mode on the portal for it.
Navigation
[0] Message Index
[#] Next page